This topic would be useful for people who need any consultation in Disk Recovery. The utilization of built-in Raid controller may demand the Raid array restoration. So, have a look at 1 example. After you've equipped a Raid array on an embedded chip set controller from AMD SB 600. You were glad because everything acted without any problems, but suddenly the time of your personal computer renewal has come. So, you made your selection on the Intel Core CPU. You have settled what motherboard to choose and you see there an embedded ICH9R controller, you have relocated your hard disk, but Raid array still can't be determined. You may choose one of 2 probable ways out:

1. One of the ways is to get new hard disks and reinstall on them a new Raid array. This will draw the situation when you require to transfer your old data on a new hard drive and it would take much time to do it and to restore previous Raid array.

2. And you may choose to turn to some “file recovery lab” where the professionals will restore your Raid array for some funds and during the short term. Or you may use specialized Raid restoration programs. If you would utilize outer Raid array such a difficulty wouldn't simply exist, because you're just to transport a controller with hard drives. One more problem is that the embedded Raid controllers that are accessible in the market, are semi-hardware. The only Raid arrays that may be recovered by these controllers are 1, 0+1, 5 and they can't use the other means of restore.

The usage of “mirroring” as guarantee of safety. Some people say that if you wouldn't utilize stripe (Raid 0), you are certainly secured from Raid arrays and file restoration. But in case of electricity difficulties, driver problems in OS, virus attacks one can lose two hard drives at once and it will not be saved by any mirroring. But what is the resolution of this type of difficulty then? In this situation you should not strive to recover the files from a Raid array or to restore the entire Raid array. The greatest point that can be done is of course taking your personal computer to a file recovery specialist or getting professional Raid restoration software. You can save your info only using these tips and without fabricating self-made restoration deeds. It is really difficult point to recover data on a hard drive with hard problems. You can see lots of raid 1 recovery programs online nowadays.

The situation when all the parameters of the motherboard's BIOS came to zero. It also can happen that a battery of a motherboard discharges and neither BIOS nor operating system may see Raid controller. It can happen in situation when BIOS has default settings. Such situations draw the other difficulty with insufficient specialists that may come to you, reinstall operating system and claim that they couldn't save any info you need. You must bear in mind that in such cases you are to entrust Raid array recovery only to a qualified specialist. A specialist will come to you, get your PC, understand a difficulty and settle it down in some minutes and without any confusion.

Raid 0 and the recovery of information from it. There is a conviction that if one of the hard disks would break down during the usage of Raid array, than all the information would be lost. Yes, it will. But if you will not try to restore it by yourself than almost in 100 percent of cases all your info will be restored. And after that you would purchase a new hard drive and restore your Raid array there. Individuals who want to do adaptec recovery are to look for it on the web.